Pressemeldungen, Nachrichten und Pressespiegel aus unserer Welt.

Jekko expands its product range with the launch of the TRX80 truck-mounted minicrane, a compact 8-ton crane designed to deliver high performance in complex operating environments and confined spaces. Mounted on a compact 2-axle truck, the TRX80 combines an 8-ton lifting capacity with a maximum outreach of 27.2 metres, while maintaining extremely compact dimensions, with the crane fully contained within the vehicle’s footprint. This compactness, combined with a crane module weight under 8 tons, allows the TRX80 to operate even on lightweight surfaces and in areas with restricted access. It is the ideal solution for fast lifting operations, such as: Installation of steel or timber structures Positioning of HVAC units Various construction and industrial lifting applications One of the key features of the TRX80 is its fully electric crane operation, powered by a 48V lithium battery capable of ensuring a full working day. The battery can be recharged via the vehicle’s Power Take-Off (PTO) or through an external power supply, both single-phase and three-phase, offering maximum operational flexibility while reducing environmental impact. Stability is ensured by hydraulic outriggers with fully stepless extension and rotation, allowing infinite positioning configurations even in the most confined spaces, with a maximum footprint of 4.6 x 4.6 metres. Integrated pressure sensors on each outrigger enable continuous monitoring of the ground load, ensuring safe operation even on sensitive surfaces. In terms of performance, the TRX80 achieves: Main boom reach: 20 metres Maximum jib reach: 27.2 metres Maximum working radius: 24.3 metres The crane can operate with a main boom, a 3,500 kg runner jib, or a 1,500 kg hydraulic jib, all easily installable without the need for external equipment. The jib also allows negative angle operation down to -60°, further increasing operational versatility. Like all Jekko minicranes, the TRX80 is equipped with an advanced safety system featuring a full Load Moment Indicator (LMI), which optimizes lifting performance based on real stability conditions and provides real-time visual feedback to the operator. Ease of use is ensured by the proportional radio remote control and the 7” onboard touchscreen display, which provide real-time visualization of the load chart and stability area, with dynamic recalculation during operation. The system also integrates interactive assistance, self-diagnosis, and troubleshooting functions, helping to reduce downtime and improve overall efficiency. With the TRX80, Jekko introduces a solution that redefines the concept of truck-mounted minicranes, combining compactness, sustainability, safety, and performance to meet the demands of a market increasingly focused on fast, precise, and low-impact operations. The TRX80 will be premiered on the market at the Smopyc exhibition in Zaragoza, at the Transgruas stand (AES23), from April 15 to 18. 🎥 Watch the TRX80 in action: TRX80 Video

World market premiere of the TRX80 Zaragoza, Spain – SMOPYC, the leading international trade fair for public works, construction and mining machinery in Spain, is one of Southern Europe’s key meeting points for industry professionals, manufacturers and technology providers. At SMOPYC 2026, Transgruas, Jekko’s official dealer in Spain, will present a wide range of lifting solutions designed to meet the evolving needs of the construction, glazing, industrial and logistics sectors. The exhibition will highlight some of Jekko’s most successful compact machines, alongside major new product launches that mark an important step forward for the brand. Visitors to the Transgruas stand AES23 will be able to discover a comprehensive selection of Jekko machines, including the SPX328, SPX532.2 and SPX650 mini cranes, the JF545.2 articulated crawler crane, the MPK06.2 and MPK10.2 2 in 1 minipickers with glass manipulators, and the MPK20.2 minipicker. Also on display will be the JVM800 independent glass manipulator, a versatile solution that can be mounted on any mini crane, further expanding machine application possibilities and improving handling efficiency in glazing operations. All eyes will be on Jekko’s new truck-mounted mini cranes of TRX family, a product category set to open new opportunities in urban lifting and jobsite mobility and representing the key highlight of Transgruas’ presence at SMOPYC. Making its first appearance in Spain, the TRX32 is a 3.2-ton mini crane mounted on a truck requiring only a Category B driving licence. Compact, practical and easy to transport, the TRX32 is designed to offer maximum accessibility and operational flexibility, especially for customers looking for a highly efficient lifting solution that can be driven and deployed with ease. Alongside it, Transgruas will also showcase the newly born at Jekko TRX80, an 8-ton mini crane mounted on a 2 axels 16ton truck. Representing the latest innovation from Jekko, the TRX80 will be presented by Jekko for the very first time ever on the market, making SMOPYC a landmark occasion for this important global debut. TRX80 features impressive performances with a maximum footprint of 4.6m x 4.6m; a reach of over 27m and a maximum lifting capacity of 8 ton. The crane is fully lithium battery operated, equipped with a generator connected to the truck’s Power Take Off and single-phase and three-phase battery chargers. With this line-up, Transgruas confirms its commitment to bringing the Spanish market the most advanced and versatile lifting technologies from Jekko. From compact mini cranes and crawler cranes to minipickers and glass handling solutions, the machines on display at SMOPYC reflect a clear focus on innovation, efficiency, ease of use and jobsite performance. Transgruas invites all visitors, customers and industry professionals to visit stand AES23 at SMOPYC 2026 to experience Jekko’s latest innovations up close and discover the future of compact lifting.

Sales, service and technical consulting for the Jekko product range Jekko announces the appointment of ARSIS LTD as its new official dealer for Greece, with immediate effect. The partnership strengthens Jekko’s dealer network and supports the company’s continued international development. ARSIS LTD, the official distributor for Fassi cranes in Greece, is specialised in the trading, repair and installation of hydraulic cranes. The company is also engaged in the importing and marketing of used lifting equipment, spare parts, construction machinery, hydraulic pumps for trucks, and related crane accessories such as personnel baskets, grabbers and aerial platforms. Alberto Franceschini, Margarita Katsouna, Yannis Katsounas Based at its headquarters in Aspropyrgos, ARSIS has a well-structured and technically skilled organisation that delivers pre- and post-sales support across Greece. Across the entire Jekko range, ARSIS will be responsible for sales activities, after-sales service and technical consulting. The cooperation aims to ensure consistent brand representation and qualified local support for customers. “The appointment of ARSIS represents an important step in the development of our dealer network,” said Alberto Franceschini, Sales Director at Jekko. “We place great value on working with partners that have technical competence and a structured approach to customer support. ARSIS meets these requirements and will represent the Jekko brand in the Greek market.” From ARSIS, the agreement confirms the company’s focus on collaboration with international manufacturers. “We are pleased to start this cooperation with Jekko,” said Yannis Katsounas, CEO of ARSIS. “Jekko is a recognised manufacturer in the lifting sector, and this partnership allows us to include its product range within our commercial offering for the Greek market.” ARSIS will distribute the full Jekko range, spanning SPX mini cranes (2.8–8 tonnes), JF articulated cranes (6.1–21.5 tonnes) and MPK minipickers (0.6–5 tonnes), as well as the new families presented at Bauma 2025: the TRX truck-mounted minicrane and the JCX telescopic crawler crane. For more information, please visit https://www.jekko-cranes.com, https://arsisepe.gr or contact info@jekko.it or info@arsisepe.gr.

A decade of trust, innovation, and shared growth in the German lifting industry From left to right: Carsten Bielefeld, Diego Tomasella, Maik Buchtmann, Alberto Franceschini. In 2025 Jekko and NordKran proudly celebrate 10 years of partnership, marking a decade defined by collaboration, professionalism, and an unwavering commitment to bringing cutting-edge lifting solutions to the German market. As a tribute to this journey, NordKran welcomed a new special custom red anniversary SPX532.2. “The birth of NordKran GmbH is dated 2015, even if the start of the collaboration with Jekko is dated 2 years before with my first sale of SPX1040 minicrane to its father company Buchtmann GmbH, directed by Willi Buchtmann” remembers Alberto Franceschini, Jekko Sales Director. “What began as a single machine delivery has grown into one of the most successful and influential collaborations in Jekko’s international network.” Under the leadership of Maik Buchtmann and Carsten Bielefeld, current CEO of Jekko Deutschland, NordKran rapidly became responsible for Jekko sales across the entire German market. The partnership evolved once again in 2020, when the Jekko subsidiary Jekko Deutschland was officially established to directly serve the German market. From that moment on, NordKran sharpened its efforts on the northern German region, where it continues to represent Jekko with passion, competence, and a deep understanding of customer needs. During these 10 years of partnership, NordKran has successfully delivered well over 100 Jekko minicranes to key customers active in glass handling, steel construction, tunnel contruction, plant construction and industrial mainteinance, contributing decisively to the brand’s reputation for quality and innovation throughout the country. Today, under the leadership of Maik Buchtmann, NordKran offers the full Jekko range — from SPX minicranes to JF crawler cranes and MPK minipickers — alongside telehandlers and vacuum-glass handling solutions. From its Delmenhorst–Bremen headquarters, dedicated teams manage new and used sales, as well as machinery rental. A wide technical network widely spread over the Country offers fast and comprehensive aftersales assistance to customers. “Being part of this journey for ten years is something I value deeply,” says Maik Buchtmann. “I’m proud of everything we have achieved in Germany and excited for many more successful years together.” Carsten Bielefeld, CEO of Jekko Deutschland, adds “At Jekko, we share this sentiment. The partnership with NordKran has been essential to building a strong market presence in Germany — one of the most important regions for our global growth. Their competence and commitment give customers a partner they know they can trust.”  About Jekko Jekko is a world leader in the design and manufacture of Lift&Handling machinery. Based in Treviso-Italy, the Company serves industries ranging from construction to industrial maintenance, prioritizing ease of use, sustainability, performance and reliability in all its products. More info: https://www.jekko-cranes.com/    marketing@jekko.it

At GIS it will take the spotlight. After its preview at Bauma 2025, the brand-new Jekko SPX532.2 will make its official debut at GIS – Giornate Italiane del Sollevamento. The first units are already hard at work on job sites around the world. The SPX532.2 is the evolution of the best-selling SPX532, a mini crane with a 3.2-ton lifting capacity and a maximum height of 17 meters. It is available in two versions: lithium battery or bi-energy Diesel with electric powerpack. Developed through close market observation and continuous customer feedback, this new model introduces several major innovations designed to boost versatility and ease of use. Stability & Performance The SPX532.2 features a brand-new stability system – upgraded on the mechanical, hydraulic, and software levels – which, combined with optimized weight distribution, ensures excellent lifting performance even in reduced stability conditions. The outriggers offer 9 different rotation positions, which can also be used in asymmetrical configurations to adapt to the most complex and hard-to-reach job sites. Everything is integrated with an advanced auto-leveling system, designed to simplify operations even for less experienced operators. With a width of just 760 mm, the SPX532.2 sets new standards for accessibility: highly maneuverable and compact, it can easily pass through narrow spaces, even a single doorway. Energy Efficiency Efficiency has also taken a big step forward. Both the battery-powered and Diesel versions are equipped with a new variable-speed engine, which significantly extends battery autonomy (up to +30%) or reduces fuel consumption, depending on the configuration. The engine also ensures lower noise levels and faster, more responsive crane movements (+15% speed increase). Advanced user experience Operator experience has been a key focus. Jekko continues to expand the intuitive interface – first introduced with the SPX328 and finalist at the UX Design Award – across its latest models. The onboard 7’’ IP66 touchscreen display provides real-time, comprehensive operational and diagnostic information. Navigation is simple and intuitive, with built-in interactive assistance guiding operators during use. Self-diagnosis and troubleshooting functions ensure quick maintenance and minimize downtime. Completing the package is the brand-new radio remote control, offering intuitive and complete management of all crane functions. Configurable for Every Job The SPX532.2 can be equipped with a wide range of accessories and attachments to build the perfect crane for any application. Options include hook or winch lifting with different winch options, pulley blocks, hydraulic jib or runner jib, glass manipulators, pipe and beam grabbers, and lifting beams. Tracks can be customized too, with standard outdoor or non-marking indoor versions. These and many other accessories turn the SPX532.2 into a tailor-made solution, adaptable to countless environments and job requirements.    About Jekko Jekko is a world leader in the design and manufacture of Lift&Handling machinery. Based in Treviso-Italy, the Company serves industries ranging from construction to industrial maintenance, prioritizing ease of use, sustainability, performance and reliability in all its products. More info: https://www.jekko-cranes.com/    marketing@jekko.it

The Company offers full sales, service, and technical consulting for the whole Jekko range. Jekko marks another significant milestone in strengthening a solid and reliable dealer network, a key driver of its international growth strategy. In this context, the company is pleased to announce the appointment of PM CZ s.r.o. as its new official dealer in the Czech Republic. With this partnership, Jekko reinforces its presence in Central Europe, ensuring local customers benefit from dedicated sales support, aftersales service, and access to the full range of Jekko products, including mini cranes, crawler cranes, and articulated crawler cranes. PM CZ s.r.o., a well-established company in the lifting and construction equipment sector, brings years of experience and a strong reputation for professionalism and customer service. The collaboration with Jekko reflects a shared commitment to innovation, reliability, and customer-focused solutions. “We are proud to welcome PM CZ s.r.o. into the Jekko dealer network,” said Alessio Forcolin, Jekko Sales Area Manager. “The Czech Republic is a strategic market for us, and we are confident that PM Cz will deliver the quality support and expertise our customers expect.” “Partnering with Jekko is an exciting step for our company,” added Miroslav Majba and Michal Váško, Managing Directors of PM CZ s.r.o. “We believe that Jekko’s advanced technologies and wide product range will bring significant value to our customers in the Czech market.” PM CZ s.r.o. team will offer for Jekko brand comprehensive services that encompass sales, service, and consulting. The dedicated service of pre-sales technical consulting will provide expert guidance to help customers choose the best equipment for their exact requirements. The service department, deeply trained by Jekko’s team, will ensure that all machineries are maintained in optimal condition, minimizing downtime and maximizing productivity. A warehouse stocked with ready-to-ship cranes and spare parts will ensure fast delivery times. PM CZ s.r.o. will distribute the whole Jekko range, that spans from SPX mini cranes (2.8-8 ton) to JF articulated cranes (6.1-21.5 ton) and MPK minipickers (0.6-5 ton), and the new families presented at Bauma: TRX Truck-mounted Minicrane and JCX Telescopic Crawler Crane. This agreement marks another milestone in Jekko’s global expansion strategy, consolidating its position as a reference brand in the field of compact lifting solutions. For more information, please visit https://www.jekko-cranes.com https://putzmeister.cz/ or contact info@jekko.it or pmcz@putzmeister.cz.  

Confirmed the partnership between Jekko and the University research center for new projects on digitalization and automation of construction industry Jekko confirms its collaboration with the Center Construction Robotics (CCR), a leading research hub within the Construction Cluster at RWTH Aachen Campus. Started with the joint MAXX project, this renewed commitment highlights Jekko’s dedication to innovation and its ongoing contribution to advancing digitalization and automation in the construction industry. At the Open-Campus-Week event held on August 26–27, 2025, with European research partners from academia, industry, associations, and politics, Center Construction Robotics celebrated its  achievements and outlined the upcoming initiatives. The event also marked the celebration of the bauma Innovation Award 2025 in the Research category, awarded to MAXX – Mobile Assembly X-System. This pioneering project, presented at Bauma 2025 at the Jekko stand, was developed by CCR in collaboration with the German Government and industry partners including Jekko, KUKA, and Fundermax. By confirming its role as a research partner, Jekko will continue to work alongside CCR and its network to tackle critical industry challenges such as material reuse, digitalization, and automation, while developing sustainable and future-oriented solutions for the construction sector. RWTH Aachen Construction Robotics Open Campus Day 2025 “We are proud to extend our partnership with CCR and to keep contributing to innovative projects that shape the construction industry of tomorrow,” said Diego Tomasella, Jekko’s CEO. This ongoing collaboration strengthens Jekko’s position as a forward-looking company, committed to research, innovation, and sustainable growth in the global construction equipment market. For more information, please visit https://www.jekko-cranes.com www.construction-robotics.de or contact info@jekko.it or office@construction-robotics.de  

The Company offers full sales, service, and technical consulting for the whole Jekko range. Jekko is pleased to announce that – starting September 1st – MOBAS AG will become exclusive dealer for Jekko brand in Switzerland. Founded in 1963 and headquartered in Wil (SG), MOBAS AG is a leading provider of lifting solutions and vehicle construction. With branches in Wil, Root, Härkingen, Grosswangen, and Echandens, the company combines sales with a strong nationwide service network, offering maintenance, repairs, spare parts, and warranty support. As the exclusive Swiss dealer for Fassi, MOBAS AG is recognized for its expertise, innovation, and customer-oriented approach, making it a trusted partner in the crane, lifting industry and vehicle construction. MOBAS team will offer for Jekko brand comprehensive services that encompass sales, service, and consulting. The dedicated service of pre-sales technical consulting will provide expert guidance to help customers choose the best equipment for their exact requirements. The service department, deeply trained by Jekko’s team, will ensure that all machineries are maintained in optimal condition, minimizing downtime and maximizing productivity. A warehouse stocked with ready-to-ship cranes and spare parts will ensure fast delivery times. Alessio Forcolin, Jekko Sales Manager, declares “We are very pleased to welcome MOBAS AG as our exclusive dealer in Switzerland. They are true experts in the lifting industry, technically well-prepared, and have an in-depth knowledge of the Swiss market. This partnership gives us the confidence that Jekko customers in Switzerland will receive the highest level of service and support”. MOBAS AG will distribute the whole Jekko range, that spans from SPX mini cranes (2.8-8 ton) to JF articulated cranes (6.1-21.5 ton) and MPK minipickers (0.6-5 ton), and the new families presented at Bauma: TRX Truck-mounted Minicrane and JCX Telescopic Crawler Crane. For more information, please visit https://www.jekko-cranes.com https://www.mobas.ch/ or contact info@jekko.it or verkauf@mobas.ch.

A September Full of International Events September has traditionally been a month packed with trade fairs for the lifting and construction industries. And 2025 is no exception to the tradition. Jekko and its network of international dealers are already buzzing with excitement preparing for the upcoming events, where we will showcase the latest Jekko product innovations. At the center of Jekko’s exhibition calendar is GIS Expo (Piacenza, Italy – September 25–27), Europe’s most important trade show dedicated to lifting, industrial handling, and specialized transport. Visitors to GIS will have the opportunity to explore the wide Jekko’s stand nr 137-External Area and experience the latest product innovations firsthand, as: TRX32. The first Jekko truck-mounted minicrane. It’s a 3,2 ton -capacity mini crane mounted on a compact truck for standard Category B driving license. Initially unveiled at Bauma and introduced to the first Customers, it is already enjoying great success. Thanks to its flexibility and ease of use, we are confident that this model has tremendous potential in markets such as Italy. SPX532.2. The new generation of the best seller SPX532 speaks for itself. Improved stability system, a new software and user interface, variable speed motor management. Come and try it. JCX80. The first Jekko Telescopic Crawler Crane. A 8-ton mini crane with a counterweighted base on robust tracks, a mobile turret and a boom that operates up to 90°, perfect for overcoming tight angles and spatial obstacles. In the mini crane range, other novelties on display will be SPX328EVO with new software improvement and SPX328EVO+ with integrated electric jib; SPX650 and SPX1280. On the articulated family, JF235 and JF545.2. On the minipicker range, the new improved MPK20.2, a 2-ton pick&carry mini crane and glass robot. Alongside GIS, Jekko will also participate in several other prestigious international events throughout September, thanks to its strong global dealer network. Just to mention the European appointments: Maxpo – Hyvinkää, Finland. August, 28-30, at Simeri Oy’s stand. Transport Expo – Herning, Denmark. September, 6-7 at Stiholt’s stand. Vertikal Days – Newark, United Kingdom. It’s THE appointment for British operators in the lifting business. The Jekko UK Team will welcome you from 10 to 11 September at stand nr 117 with the latest TRX32 truck-mounted mini crane and many other interesting product novelties. Innovationstage Höhenzugangstechnik – Hohenroda, Germany, from 10 to 11 September, at Jekko Deutschland’s Matexpo – Kortrijk, Belgium. From 10 to 14 September, it’s the Belgian trade fair for construction equipment, machinery and vehicles. Jekko mini cranes will be displayed at Rentalift Lift’N’Load – Gilze, The Netherlands, Septmeber 13th, at Hocap’s booth. ForArch – Prague, Czech Republic. The reference fair for construction industry in Czech Republic, from 16 to 20 September. Kolex’s booth 2-C03. JDL Expo – Beaune, France. It is the benchmark annual event for France, welcoming thousands of visitors from across the country each year. The Jekko France Team will welcome you from 17 to 19 September at stand nr A6. Rettermesse – Wels, Austria. The Austrian fair for emergency services, from 18 to 20 September, at Kogler Krantechnik’s stand. Internationale Schwerlasttage – Hohenroda, Germany, from 19 to 20 September, at Jekko Deutschland’s stand.